• Used for bottom sub-plate mounting
• Installation face follow DIN 24340 E and ISO 6264
• Used in screw connection, Used for bottom sub-plate mounting
• Five pressure ranges
• Unloading operation via a built-on solenoid directional valv
• Two adjustment types: knob, adjustment screw with protection cap
• Optional switching shock damping
| Installation position | Optional | ||||||
| Weight | G...DBW...10 | G...DBW...15 | G...DBW...20 | G...DBW...25 | G...DBW...30 | ||
| Base sub-plate mounting G...DBW | kg | about 5.6 | - | about 6.5 | - | about 7.9 | |
| threaded connection G...DBW..G.. | kg | about 7.9 | about 7.8 | about 7.7 | about 8.5 | about 8.4 | |
| Switching shock damping | kg | about 0.6 | |||||
| Technical parameters of directional valve | Refer to the solenoid valvetype G...WE6,normally close use G...3WE6A9, normally open use G...3WE6B9 | ||||||
| Fluid | Mineral oil suitable for NBR and FKM seal | ||||||
| Phosphate ester for FKM seal | |||||||
| Fluid temperature range | ℃ | -30 to +80(NBR seal) | |||||
| -20 to +80(FKM seal) | |||||||
| Viscosity range | mm2/s | 10 to 800 | |||||
| Degree of contamination | Maximum permissible degree of fluid contamination: Class 9. NAS 1638 or 20/18/15, ISO4406 | ||||||
| Max. operating pressure | Port A, B, X, P | bar | 350 | ||||
| Port Y or T DBW | bar | 210 | |||||
| Max. setting pressure | bar | 50; 100; 200; 315; 350 | |||||
| Min. | bar | Interrelated with Q(Refer to the characteristic curve) | |||||
| NS (NG) | 10 | 15 | 20 | 25 | 30 | ||
| Max. flow-rate | Base Sub-plate mounting | L/min | 250 | - | 500 | - | 650 |
| threaded connection | L/min | 250 | 500 | 500 | 500 | 650 | |
ADD: Address: No. 81, Zhuhang Road, Minhang District, Shanghai（Shanghai Lixin Hydraulics Co., Ltd.)
TEL: 021-31616718 Tel: 021-31616718, ext. 8000 ( reception )
© 2023 Shanghai Lixin Hydraulics Co., Ltd. copyright hu13042344
