• Direct acting, used for controlling pressure and fluid flow direction
• proportional electromagnet operated spool action
• Spring of control valve spool centering alignment
• Optional built-in amplifier
• Suitable for metallurgy and other applications where pressure and flow rates are required
| Hydraulic | ||||
| Specifications | 3DREP6...L2X | 3DREPE6...L2X | ||
| Installation position | Optional, preferably horizontal | |||
| Weight | KG | 2 | 2.2 | |
| Ambient temperature range | ℃ | -20 to +70 | -20 to +50 | |
| Max. flow-rate | L/min | 15 (Δp = 50 bar) | ||
| Hysteresis | % | ≤5 | ||
| Repeatability | % | ≤1 | ||
| Response sensitivity | % | ≤0.5 | ||
| Max. operating pressure | Port P | bar | 20 to 100，pressure stage 16 | |
| 30 to 100，pressure stage 25 | ||||
| 50 to 100，pressure stage 45 | ||||
| Port T | 0 to 3 | |||
| Fluid | Mineral oil suitable for NBR and FKM seal | |||
| Phosphate ester for FKM seal | ||||
| Fluid temperature range | ℃ | -20 to +80 | ||
| Viscosity range | mm2/s | 20 to 380 (preferably 30 to 46) | ||
| Degree of contamination | Maximum permissible degree of fluid contamination: Class 9 | |||
| Electrical data | ||||
| solenoid | ||||
| Specifications | 3DREP6...L2X | 3DREPE6...L2X | ||
| Electrical data | DC | |||
| Command value signal | - | ±10V | ||
| Max. current per solenoid | A | 1.5 | 2.5 | |
| Coil resistance | Cold value at 20 ℃ | Ω | 4.8 | 2 |
| Max. warm value | 7.2 | 3 | ||
| Duty | % | ED100% | ||
| Coil temperature | ℃ | to 150 | ||
| Valve protection to EN 60529 | IP 65 | |||
| Ampilfier | VT-VSPA2-50-L1X | integrated | ||
| Operating voltage | Nominal voltage | VDC | 24 | |
| Lower limiting value | V | 19 | ||
| Upper limiting value | V | 35 | ||
| Amplifier current consumption | Imax | A | 1.8 | |
| Imax | A | 4 | ||
ADD: Address: No. 81, Zhuhang Road, Minhang District, Shanghai（Shanghai Lixin Hydraulics Co., Ltd.)
TEL: 021-31616718 Tel: 021-31616718, ext. 8000 ( reception )
© 2023 Shanghai Lixin Hydraulics Co., Ltd. copyright hu13042344
