NG6-L6X
• Direct solenoid control slide valve
• Installation face follow DIN 24340 A, ISO 4401 and CETOP-RP 121H sub-plate mounting connection sub-plate mounting connection
• Wet-pin AC or DC solenoids with detachable coil
• Replace coil without releasing oil
• Electrical connection as individual or central connection
NG10-L3X
• Direct solenoid control slide valve
• Installation face follow DIN 24340 A, ISO 4401 and CETOP-RP 121H sub-plate mounting connection sub-plate mounting connection
• DC solenoid with removable coil
• Replace coil without releasing oil
NG10-L5X
• Direct solenoid control slide valve
• Installation face follow DIN 24340 A, ISO 4401 and CETOP-RP 121H sub-plate mounting connection sub-plate mounting connection
• DC or AC solenoid with removable coil (using a rectifier to connect to AC)
• Solenoid coil can rotate 90°
• Replacing the coil does not require opening the sealed chamber
• Optional time switch control function
| Specifications | NG6-L6X | NG10-L3X | NG10-L5X | |
| Installation position | Optional | |||
| Ambient temperature range ℃ | -30 to +50 (NBR seals) | |||
| -20 to +50 (FKM seals) | ||||
| Weight | valve kg | / | / | / |
| Sub-Sub-plate mounting kg（G115/01A） | / | / | / | |
| Single solenoid valve kg | 1.5 | Independently wiring：4.3（DC）,3.5(AC) | 4.3（DC） | |
| Central monitoring station：4.4（DC）,3.6(AC) | ||||
| Double solenoid valve kg | 2.0 | Independently wiring：5.9（DC）,4.3(AC) | 5.9（DC） | |
| Central monitoring station：6.0（DC）,4.4(AC) | ||||
| Max.operating pressure | Port A，B，P bar | 350 | 315 | 350 |
| Port T bar | 210（DC）,160(AC) | 210(DC) | ||
| Max. flow-rate L/min | 80(DC） 60(AC) | 120 | 150 | |
| Flowarea (switching neutral position) | V type mm2 | / | 11(A/B → T);10.3(P → A/B) | / |
| Q type mm2 | for symbol Q 6% of nominal cross section | 2.5(A/B → T) | / | |
| W type mm2 | for symbol W 3% of nominal cross section | 5.5(A/B → T) | / | |
| Fluid | Mineral oil suitable for NBR and FKM seal | Mineral oil (HL, HLP) to DIN 51 524,suitable for NBR and FKM | ||
| Phosphate ester for FKM seal | ||||
| Fluid temperature range℃ | -30 to +80(NBR seal) | |||
| -20 to +80(FKM seal) | ||||
| Viscosity range mm2/s | 2.8 to 500 | |||
| Degree of contamination | Maximum permissible degree of fluid contamination: Class 9. NAS 1638 or 20/18/15, ISO4406 | |||
ADD: Address: No. 81, Zhuhang Road, Minhang District, Shanghai（Shanghai Lixin Hydraulics Co., Ltd.)
TEL: 021-31616718 Tel: 021-31616718, ext. 8000 ( reception )
© 2023 Shanghai Lixin Hydraulics Co., Ltd. copyright hu13042344
